Dust gun, as the name implies, is a tool for cleaning dust, but different from ordinary cleaning tools, it is used for dust removal during the installation and maintenance of factories, and for cleaning narrow, high places and various pipes that cannot be reached by hands. It works by amplifying the air to create a flow of air that drives the surrounding air to work with the dust removal effect.

First, the application of dust gun

Dust GUNS are mainly used in areas THAT are out of reach, such as pipes, machine parts, gears, narrow gaps, and areas to avoid being touched. Can be used to remove dust, powder, processing debris and water droplets, air cleaning, drying and cooling can be.

Two, the characteristics of the dust gun

1, new tools, compact body, easy to use.

2. Make up for the lack of human contact when cleaning.

3, clean fast, time saving, energy saving and environmental protection.

Three, dust gun maintenance and maintenance

1. Drop a few drops of special lubricating oil (maintenance oil, sewing machine oil) for pneumatic tools from the air inlet before and after using the tool each time to reduce the loss and prolong the service life of the tool;

2. A drainer is installed at the source of the air supply to ensure that the air entering the inlet is dry, pollution-free and free of impurities;

3. Clean regularly and replace worn parts in time so as not to interfere with other parts and reduce work efficiency;

4. Apply antirust oil to the tools that are not used for a long time before storage, and block the leakage holes such as the air inlet and supply source to prevent impurities from entering the inside of the tools;

5. Carry out regular safety inspection on the tools. The main items to be checked are:

(1) The air source hose and the joint should be fastened and connected, not loose air leakage; Intake valve to maintain good sealing, switch sensitive, to ensure no leakage when sealing.

(2) Check whether the gas supply pipeline is intact, and replace it immediately if there is wear, aging, corrosion, local air leakage and swelling.

(3) Check whether the protective device and tool parts have wear, crack, bending and other phenomena, if found, replace immediately.

(4) Observe whether the running speed and state of the tool are good.

Four, the operation of dust blowing gun matters needing attention

1. Read the product instruction carefully before operation to understand the function of each button component;

2. The dust gun needs to be connected with a compressor or air compressor when it is used;

3. Clean the dust gun regularly to prevent a large amount of dust or other sediment from falling on the parts of the dust gun. The power supply should be cut off when cleaning;

4, can not be used in the environment containing flammable gas and a large amount of dust;

5, if you need to repair, please find a professional, do not disassemble without authorization;

6. It is absolutely forbidden to aim the dust gun at the human body or animals, which will cause damage to the eyes and skin.